Early 2015 macbook pro ssd upgrade7/3/2023 However, the installer does not "see" the Aura Pro X2 like this (says it cannot read the drive), and it does not show as an option to select which drive to install to. My plan was to boot using the Factory Original SSD and tell the installer to install Monterey on the Aura Pro X2 (which was still installed in the Mac). Kit includes all tools needed for DIY installation. This worked, and I was able to boot into High Sierra, and even activate the Monterey Installer that was on the other external enclosure. Upgrade the SSD of any 2013-2015 MacBook Pro for up to 16x the capacity of the original factory drive. Something to note: I tried booting from the Factory Original SSD in an OWC external enclosure. I had the Monterey installer copied on an external drive, from which I ran it both times to do the install. Once installed, removed Factory Original SSD, reinstalled Aura Pro X2 SSD. Screen flashed several times on reboot, indicating firmware upgrade was in progress. Whilst the MacBook Pro, Early 2015 - Mid 2015 models are able to take advantage of slightly higher speeds than previous MacBook Pro models, thanks to an upgrade from PCIe 2.0 x 2 to PCIe 3.0 x 4. Removed, replaced with Factory Original SSD, and upgraded from High Sierra to Monterey. Higher-end, more expensive SSD’s utilising newer technology run at up to 3000MB/s, whilst the more budget-friendly SSD’s run at up to 1800MB/s. Installer throws error and says to try again.
0 Comments
Leave a Reply. |